Reltio Connect

Hi Team,

We are utilizing D&B Datablocks Connectors to enhance our organizational data. The D&B hierarchy is obtained through the OOTB RIH D&B recipes. We are currently not receiving any relationship start and end date. Our objective is to understand the process of incorporating relationship start and end dates into the D&B hierarchies through  OOTB RIH recipes following the enrichment process.

Also, as part of the OOTB configuration for D&B Hierarchy relationship we are using the below property name.

"entityEndDateStrategy": "END_DATE_RELATION_CROSSWALKS"

Hence, will the above property supports incorporating start and end date, which is currently not available post enrichment.

------------------------------
Avni Kanchan
Deloitte
------------------------------

Hi,

The "entityEndDateStrategy": "END_DATE_RELATION_CROSSWALKS" strategy specifies how to handle the relationship when the start or end entity has an end date.

To add the D&B relationship's start and end dates, use the relationship's start date and end date fields. Please note that these fields are applied at the relationship level. If you wish to manage them explicitly at the crosswalk level, define two separate attributes for the start date and end date.

------------------------------
Radhakrishnan Ramalingam Architect
Majix Solutions Inc
San Ramon, CA
------------------------------

Hi RadhaKrishnan,

Thanks for responding!!

To add the D&B relationship's start and end date, can you please suggest that do we need to look into inbuild RIH D&B recipes?

------------------------------
Avni Kanchan
Deloitte
------------------------------

Original Message:
Sent: 02-07-2025 12:25
From: Radhakrishnan Ramalingam
Subject: Incorporating relationship start date and end date to D&B hierarchies

Hi,

The "entityEndDateStrategy": "END_DATE_RELATION_CROSSWALKS" strategy specifies how to handle the relationship when the start or end entity has an end date.

To add the D&B relationship's start and end dates, use the relationship's start date and end date fields. Please note that these fields are applied at the relationship level. If you wish to manage them explicitly at the crosswalk level, define two separate attributes for the start date and end date.

------------------------------
Radhakrishnan Ramalingam Architect
Majix Solutions Inc
San Ramon, CA
------------------------------

Please make the required changes within the Relationship and include them in the RIH Recipe as well

------------------------------
Radhakrishnan Ramalingam Architect
Majix Solutions Inc
San Ramon, CA
------------------------------

Original Message:
Sent: 02-10-2025 02:05
From: Avni Kanchan
Subject: Incorporating relationship start date and end date to D&B hierarchies

Hi RadhaKrishnan,

Thanks for responding!!

To add the D&B relationship's start and end date, can you please suggest that do we need to look into inbuild RIH D&B recipes?

------------------------------
Avni Kanchan
Deloitte
------------------------------


Original Message:
Sent: 02-07-2025 12:25
From: Radhakrishnan Ramalingam
Subject: Incorporating relationship start date and end date to D&B hierarchies

Hi,

The "entityEndDateStrategy": "END_DATE_RELATION_CROSSWALKS" strategy specifies how to handle the relationship when the start or end entity has an end date.

To add the D&B relationship's start and end dates, use the relationship's start date and end date fields. Please note that these fields are applied at the relationship level. If you wish to manage them explicitly at the crosswalk level, define two separate attributes for the start date and end date.

------------------------------
Radhakrishnan Ramalingam Architect
Majix Solutions Inc
San Ramon, CA

Hi Avni, I believe you are looking to add Relationship start and end date in batch procession. If yes - you can navigate to "D&B | FUNC | Batch Update Hierarchy Connections - Reltio Load" recipe further navigate to "Create DnB hierarchies in bulk" -> look into the data pills source -> make changes as you desired and map the relationship attributes accordingly.  

------------------------------
Ashish Rawat
Sr. Manager
Fresh Gravity
Bangalore
------------------------------

Hi Ashish,

Thanks for the response!!

Can you please also let us know the corresponding step number and the Datapill label from which we can get the "start date" and "end date" for the hierarchy from D&B. 

------------------------------
Avni Kanchan
Deloitte
------------------------------

Original Message:
Sent: 02-12-2025 15:28
From: Ashish Rawat
Subject: Incorporating relationship start date and end date to D&B hierarchies

Hi Avni, I believe you are looking to add Relationship start and end date in batch procession. If yes - you can navigate to "D&B | FUNC | Batch Update Hierarchy Connections - Reltio Load" recipe further navigate to "Create DnB hierarchies in bulk" -> look into the data pills source -> make changes as you desired and map the relationship attributes accordingly.  

------------------------------
Ashish Rawat
Sr. Manager
Fresh Gravity
Bangalore
------------------------------

So far I haven't seen relationship start and end date for a relationship in OOTB data blocks from D&B. However any change in hierarchies are taken care by connector itself via Monitoring 

------------------------------
Ashish Rawat
Sr. Manager
Fresh Gravity
Bangalore
------------------------------

Original Message:
Sent: 02-19-2025 01:52
From: Avni Kanchan
Subject: Incorporating relationship start date and end date to D&B hierarchies

Hi Ashish,

Thanks for the response!!

Can you please also let us know the corresponding step number and the Datapill label from which we can get the "start date" and "end date" for the hierarchy from D&B. 

------------------------------
Avni Kanchan
Deloitte
------------------------------


Original Message:
Sent: 02-12-2025 15:28
From: Ashish Rawat
Subject: Incorporating relationship start date and end date to D&B hierarchies

Hi Avni, I believe you are looking to add Relationship start and end date in batch procession. If yes - you can navigate to "D&B | FUNC | Batch Update Hierarchy Connections - Reltio Load" recipe further navigate to "Create DnB hierarchies in bulk" -> look into the data pills source -> make changes as you desired and map the relationship attributes accordingly.  

------------------------------
Ashish Rawat
Sr. Manager
Fresh Gravity
Bangalore

The start and end dates for the relationship are not delivered as a part of the data block returned by D&B.  What can be done is making the start date the date that the relationship was first received from D&B.  To Ashish's comment, if the relationship changes on the D&B side you would get this as a part of the monitoring feed from D&B.  The end date would be the date that you received the notification.

Hope this helps.

------------------------------
Jay Daly
Dun & Bradstreet
Chattanooga TN
------------------------------

Original Message:
Sent: 02-19-2025 01:52
From: Avni Kanchan
Subject: Incorporating relationship start date and end date to D&B hierarchies

Hi Ashish,

Thanks for the response!!

Can you please also let us know the corresponding step number and the Datapill label from which we can get the "start date" and "end date" for the hierarchy from D&B. 

------------------------------
Avni Kanchan
Deloitte
------------------------------


Original Message:
Sent: 02-12-2025 15:28
From: Ashish Rawat
Subject: Incorporating relationship start date and end date to D&B hierarchies

Hi Avni, I believe you are looking to add Relationship start and end date in batch procession. If yes - you can navigate to "D&B | FUNC | Batch Update Hierarchy Connections - Reltio Load" recipe further navigate to "Create DnB hierarchies in bulk" -> look into the data pills source -> make changes as you desired and map the relationship attributes accordingly.  

------------------------------
Ashish Rawat
Sr. Manager
Fresh Gravity
Bangalore