@Deepak Bhansali, let me see who I can find to help. Thoughts
@Prasad Satam? I will ping some others as well
------------------------------
Chris Detzel
Community Program Manager
Reltio
------------------------------
Original Message:
Sent: 06-02-2021 21:42
From: Deepak Bhansali
Subject: Address cleansing - Configuring Chain Cleansing
@Chris Detzel - Any pointers? We have configured L3 with 3 processes in Chain but still not sure which one is actually being considered for cleaning a particular Profile.
------------------------------
Deepak Bhansali
Sr Technical Product Manager
Advance Auto P[arts
Raleigh
Original Message:
Sent: 05-23-2021 15:54
From: Deepak Bhansali
Subject: Address cleansing - Configuring Chain Cleansing
Hello Prasad,
Tried but "pre" is behaving the same as with CASS.
That is the reason we are looking to explore the "chain" so that any address which is not verified by CASS goes to Next level in Chain for cleasining.
Input Address:
Addressline 1- 6850 Fry Rd
City- Cypress
State- TX
Zip5- 77433
Country- US
Both in CASS and Pre the AddressLine 1 is changing to 6850 Ferry Rd and Verification Status remains "Partially Verified"
wherein normal Loqate process without CASS the Input address comes as Verified address.
Screenshot Without CASS and
WITH CASS or/and PRE
------------------------------
Deepak Bhansali
Sr Technical Product Manager
Advance Auto P[arts
Raleigh
Original Message:
Sent: 05-21-2021 18:35
From: Prasad Satam
Subject: Address cleansing - Configuring Chain Cleansing
Hello Deepak,
Thank you for posting this question, it is an interesting ask. We do have a provision where we can support CASS and non-CASS calls without chain cleansing. This information is available on the doc portal at - Preprocessing Location Data
| Reltio | remove preview |
| | Preprocessing Location Data | | To improve CASS/SERP address cleansing, Reltio's Cleanse module supports preprocessing of location data before sending the data to the address cleansing function. It is often beneficial to perform preprocessing of location data before feeding it to the CASS or SERP engine. | | View this on Reltio > |
|
|
With this configuration, if the quality of address from CASS cleansing is not good (either Partially verified or Unverified), we run it through a non-CASS cleansing and use the output to feed it back to the CASS cleansing engine. This improves the quality of cleansed addresses but with a small price of performance as it has to go through 2 cleanse calls for poor quality addresses.
Hope this helps!
------------------------------
Prasad Satam
Original Message:
Sent: 05-20-2021 15:33
From: Chris Detzel
Subject: Address cleansing - Configuring Chain Cleansing
@Deepak Bhansali, I am bringing this to the front of the link. Hopefully we can find some insights for you on this question.
Chris
------------------------------
Chris Detzel
Community Program Manager
Reltio
Original Message:
Sent: 05-18-2021 15:51
From: Deepak Bhansali
Subject: Address cleansing - Configuring Chain Cleansing
Hello Reltio users,
Is anyone using Chain Cleansing feature for address cleaning and standardization? If scenarios, sample configuration, and understanding can be shared as we are facing difficulties in Address cleaning where CASS (for US address) is not returning the desired output and input and output address is completely changing and showing up as Partially verified whereas without CASS input address is standardized and verfied.
Before we do a poc wanted to validate the understanding of Chain Cleansing functionality where the expectation at our end is
The address will be first cleansed with 1st process in "Chain" if returned Unverified (Partially verified or Ambiguous or UnVerifed ) only then it will go to the next process in "chain" sequence and the last process in sequence will be the default.
Any help and pointers are much appriciated.
Reltio Doc reference- Configuring Chain Cleansing| Reltio | remove preview |
| | Configuring Chain Cleansing | | The purpose of defining a chain section is to gain the best cleansed result. The chain section of cleanseConfig specifies a list of cleanse functions that are applied one by one in a chain. When we need to validate addresses from more than one country. | | View this on Reltio > |
|
|
Thanks & Regards,
Deepak Bhansali
Advance Auto Parts
Sr Technical Product Manager, Professional Customer MDM
Raleigh, NC
------------------------------
Deepak Bhansali
Sr Technical Product Manager
Advance Auto P[arts
Raleigh
------------------------------